VW T6.1 button for ASR/ESC switch off retrofit package

Significantly upgrade your VW T6.1 with the original button panel for switching off the ASR (traction control).

Here we supply you with the complete package for retrofitting the ASR/ESC button in your VW T6.1 bus.

With the ASR button you can switch the electronic traction control of your VW T6.1 off and on again at the touch of a button while driving.

This means you can drive more easily and more safely on snowy or slippery slopes as the "traction control" no longer blocks the wheels.

The wheels spin just like you "step on the gas".

After briefly plugging it into the very easily accessible OBD diagnostic interface in the driver's footwell, the supplied KECODI coding interface uses the innovative KECODI APP, which is already pre-configured for you, to completely automatically activate the ASR button.

Scope of delivery:

• - 1x original VW T6.1 button strip ASR/ESC (depending on model)
• - 1x original VW T6.1 trim part driver's side (depending on model)
• - 1x pre-assembled cable set
• - 1x activation function (= software / coding / activation) for one vehicle
• - 1x KECODI coding interface
• - 1x KECODI coding interface storage box
• - 1x installation instructions (German)

Installation time: approx. 2 hours

Please provide the chassis number during the ordering process.

Product attributes:

Retrofitting the original button panel with ASR/ESC button is possible on all VW T6.1 bus models of all years of manufacture, all variants (Multivan, Transporter, Bus, Caravelle, Business, California, etc.) as well as all equipment variants (manual transmission/automatic transmission) without a currently installed button panel to the left above the light switch.

NOT suitable for VW T6 models up to and including model year 2019, for these you need the retrofit package with article number: 22838

To retrofit the ARS/ESC button bar WITH hill descent assistant you need the retrofit package with article number: 22951

The cable set leads from the new button panel, which is installed to the left of the light switch in the panel that is always included, to the ESP/ABS control unit. This is located in the engine compartment and can be reached from above.

We will supply you with the identical panel as currently installed (color, etc.) with an additional recess for this button strip.

Information about the driver's side trim part:

For T6.1 models without a currently installed button strip on the driver's side (= no buttons to the left above the light switch - see product images), a trim part without a recess for this combined button strip is currently always installed.

This panel without button strip is installed if no ASR button, no hill descent assistant and no differential lock are installed ex works.

To retrofit the ASR/ESC button and/or the hill descent assistant, this cover supplied here is always required.

If your VW T6.1 has "only" the ASR/ESP button without hill descent assistant installed from the factory, please note our retrofit package for the hill descent assistant.

If your VW T6.1 does not currently have a button panel installed, you will need the retrofit package offered here.

We will supply you with the identical panel as currently installed (color, etc.) with an additional recess for this button strip.